home *** CD-ROM | disk | FTP | other *** search
- Path: malin.foa.se!usenet
- From: bjolin@lin.foa.se (Bj÷rn Lindgren)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: MicroBotics VXL-030
- Date: 22 Jan 1996 06:52:55 GMT
- Organization: FOA
- Message-ID: <4dvc87$q16@malin.foa.se>
- References: <4duc0t$sh3@brain.npiec.on.ca>
- NNTP-Posting-Host: loke.lin.foa.se
- Mime-Version: 1.0
- X-Newsreader: WinVN 0.99.3
-
- In article <4duc0t$sh3@brain.npiec.on.ca>, Gino Caroli writes...
- >
- >Ok I have a question....
- >
- >I have a MicroBotics VXL-030 Board with a 68EC030 Chip at 25Mhz..
- >I noticed that there is a silver chip (I guess it is) And the slot is
- >labelled CPU-CLOCK and the chip itself says 25Mhz on it.
- That is the clock oscillator.
-
- >If I was to
- >upgrade to say a 68030 Chip at 33Mhz would I have to have a CPU-CLOCK at
- >the same speed?
- Yes!
-
- >
- >Also if I was to also get a 68882 FPU chip would it have to be the same
- >speed at the 030 and would I also need the FPU-CLOCK (I noticed there was
- >a slot for that also)
- There is a jumper that allows you to either use the CPU clock or a
- different clock (FPU clock). In that way you can have different clock
- speeds for the CPU and FPU.
-
-
- >
- >Any help would be greatly appreciated
- Hope this helps.
-
- --
- * Bjorn Lindgren | All opinions written by me is mine mine and*
- * | only mine. *
-
-